High Power Type Battery Cycler
Battery Test System - WBCS high power type - WBCS3000D: 2 channel type (Max 400Watt/CH)
Model: WBCS3000D
Manufacturer: WonATech – Korea
Information:
+/-5V, 27A (WBCS3000D_527B)
-1V to 10V, 24A (WBCS3000D_1024U)
-1V to +21V, 15A (WBCS3000D_2115U)
-1V to +43V, 8A (WBCS3000D_438U)
The above 4 models are for WBCS3000D typically but you can order with customized specification for your own purpose.
Application:
- Power device appication
- Battery/Super capacitor test
- Solar cell test, fuel cell test
- For multichannel application
- Other Echem experiments
Features
- Max. power per channel: 400Watt
- Voltage range: Refer to Power configuration map
- Current range: 4 ranges
- Voltage accuracy: ±0.05% f.s. (<10V)
- Current accuracy: ±0.05% f.s.
- Max. 300,000 data point memory on control board
- Potentiostat/galvanostat circuit
+ No switching time (charging to discharging, discharging to charging)
+ Analog feedback control to keep constant voltage & current
+ Capability of electrochemical experiments by controlling voltage versus reference electrode for positive voltage polarity only.
- High precision: 16bit (0.0015% full scale) ADC, DAC; MOSFET type linear power supply circuit.; Shield cell cable to prevent EMI noise
- Safety
+ Unique “fail check” function
+ System safety parameter
+ User defined safety condition setting
+ Automatic cell connection check: before experiment, if the cell voltage value is near 0 Volt, program gives the warning message for the operator to check the cell connection.
+ To prevent over current, poly-switch is located in each channel.
+ Watchdog function: stop “running channel(s)” on communication failure.
+ If main program was down by unstable operating system, independent server program keeps the experiment (control & data acquisition) without dead time..
- Maintenance & system expansion
+ 2channels per housing
+ power supply per 2 channel
+ easy expansion up to 128 channels by adding plug in channel or by adding 8ch controllers & channels
- LAN communication
- User friendly software
- Compatible with IVMANTM DC data analysis software without purchasing license code.
- Customized specification available
- Experimental Techniques
+ Energy Test: CC/CV (lithium battery), CC/CC (NiCd (NiMH) battery), Steady state CV, GITT, PITT…
+ Electroanalytical techniques: Cyclic voltammetry, linear sweep voltammetry…
+ Corrosion measurement: Tafel, potentiodynamic, galvanostatic, cyclic polarization
Specifications:
- Hardware:
+ Control voltage range: Refer to Power configuration map
+ Control current range: 4 ranges
+ LED: Run: 1ea, Mode: 2ea, Irange: 4ea
+ Input impedance: 1012 Ohm for V<10V
+ Cell connection: 4 probe type, alligator clip cables
+ Max. channel no.: 128
+ Voltage accuracy: ±0.05% f.s. (<10V)
+ Current accuracy: ±0.05% f.s.
- Voltage Control/Measurement
+ Full scale ranges: Refer to power configuration map
+ Resolution (16 bits): 0.0015% f.s
- Current Control/Measurement
+ Maximum current depending on voltage range
1) Max 27A @ ±5V
2) Max 26A @ -1V~+10V
3) Max 21A @ -1V~+12V
4) Max 15A @ -1V~+21V
5) Max 10A @ -1V~+31V
6) Max 7A @ -1V~+43V
- Resolution: 16 bit (0.0015% f.s)
- Communication: TCP/IP
All specifications are subject to change without notice.
