Mid Power Type Battery Cycler
Battery Test System - WBCS mid power type - WBCS3000S
Model: WBCS3000S
Manufacturer: WonATech – Korea
Application:
- Battery cycle life test
- Supercapacitor test
- Fuel cell test
- Solar cell test
- Material test
Features
- Standard 8 channel battery cycler
- 8 channel battery cycler (expandable up to 128 channels)
- Max. power per channel: 50Watt
- Voltage range: ±5V(standard), user can specify the voltage range within <80V
- Current range: max. ±5A, 4 ranges (depending on system specification)
- Voltage/current accuracy: ±0.02% f.s.
- Max. 300,000 data point memory on control board
- Potentiostat/galvanostat circuit
+ No switching time (charging to discharging, discharging to charging)
+ Analog feedback control to keep constant voltage & current
+ Capability of electrochemical experiments by controlling voltage versus reference electrode for positive voltage polarity only.
- High precision: 16bit (0.0015% full scale) ADC, DAC; MOSFET type linear power supply circuit.; Shield cell cable to prevent EMI noise
- Safety
+ Unique “fail check” function
+ System safety parameter
+ User defined safety condition setting
+ Automatic cell connection check: before experiment, if the cell voltage value is near 0 Volt, program gives the warning message for the operator to check the cell connection.
+ To prevent over current, poly-switch is located in each channel.
+ Watchdog function: stop “running channel(s)” on communication failure.
+ If main program was down by unstable operating system, independent server program keeps the experiment (control & data acquisition) without dead time..
- LAN communication
- User friendly software
- Compatible with IVMANTM DC data analysis software without purchasing license code.
- Customized specification available
- Experimental Techniques
+ Energy Test: CC/CV (lithium battery), CC/CC (NiCd (NiMH) battery), Steady state CV, GITT, PITT…
+ Electroanalytical techniques: Cyclic voltammetry, linear sweep voltammetry…
+ Corrosion measurement: Tafel, potentiodynamic, galvanostatic, cyclic polarization
Specifications:
- Hardware:
+ Control voltage range: ±5V (standard) *1
+ Control current range: 4 ranges
+ LED: Run: 1ea, Mode: 2ea
+ Input impedance: 1012 Ohm
+ Cell connection: 4 probe type, alligator clip cables
+ Max. channel no.: 128
+ Voltage accuracy: ±0.02% f.s.
+ Current accuracy: ±0.02% f.s.
- Voltage Control/Measurement
+ Full scale ranges: ±5V (standard) *1
+ Resolution (16 bits): 0.15mV (standard) *1
- Current Control/Measurement
+ Full scale ranges: Depending on system specification; Max. 5A@±5V
+ Resolution: 16 bit (0.0015% f.s)
+ Communication: TCP/IP
*1: User can specify the voltage range within <80V for difference between high and low voltage. All specifications are subject to change without notice.
