Low Power Type Battery Cycler
Battery Test System - WBCS low power type
Model: WBCS3000Ls / WBCS3000Le
Manufacturer: WonATech – Korea
Information:
Model WBCS3000Ls : ±10mA
Model WBCS3000Le : ±100mA
Customized specification is available.
Application:
- For low current application
- Micro battery application
- Sensor application
- Electroanalytical application
Features
- Low current type
- 8 channel battery cycler (expandable up to 128 channels)
- Max. 300,000 data point memory on control board
- Potentiostat/galvanostat circuit
+ No switching time (charging to discharging, discharging to charging)
+ Analog feedback control to keep constant voltage & current
+ Capability of electrochemical experiments by controlling voltage versus reference electrode for positive voltage polarity only.
- High precision: 16bit (0.0015% full scale) ADC, DAC; MOSFET type linear power supply circuit; Shield cell cable to prevent EMI noise
- Safety
+ Unique “fail check” function
+ System safety parameter
+ User defined safety condition setting
+ Automatic cell connection check: before experiment, if the cell voltage value is near 0 Volt, program gives the warning message for the operator to check the cell connection.
+ To prevent over current, poly-switch is located in each channel.
+ Watchdog function: stop “running channel(s)” on communication failure.
+ If main program was down by unstable operating system, independent server program keeps the experiment (control & data acquisition) without dead time..
- LAN communication
- User friendly software
- Compatible with IVMANTM DC data analysis software without purchasing license code.
- Customized specification available
- Experimental Techniques
+ Energy Test: CC/CV (lithium battery), CC/CC (NiCd (NiMH) battery), Steady state CV, GITT, PITT…
+ Electroanalytical techniques: Cyclic voltammetry, linear sweep voltammetry…
+ Corrosion measurement: Tafel, potentiodynamic, galvanostatic, cyclic polarization
Specifications:
- Hardware:
+ Control voltage range: ±5V (standard)
+ Control current range: 4 ranges
+ LED: run: 1 ea.
+ Input impedance: 1012 Ohm
+ Cell connection: 4 probe type, alligator clip cables
+ Max. channel no.: 128
+ Voltage accuracy: ±0.02% f.s.
+ Current accuracy: ±0.02% f.s.
- Voltage Control/Measurement
+ Full scale ranges: ±5V (standard)
+ Resolution (16 bits): 0.15mV (standard) @±5V
- Current Control/Measurement
+ Full scale ranges: Max. 10mA@5V(WBCS3000Ls); Max. 100mA@5V(WBCS3000Le)
+ Resolution: 16 bit (0.0015% f.s)
+ Communication: TCP/IP
