Pneumatic Battery Edge Trimming Machine

DETAILS

Pneumatic Battery Edge Trimming Machine

This battery edge cutting machine is mainly used for lithium polymer battery aluminum-plastic film trimming molding, and it can also be used for cutting off other soft materials.

Product Introduction

200mm pneumatic battery edge trimming machine for lab pouch cell

battery edge trimming machine

mR-QP200

This battery edge cutting machine is mainly used for lithium polymer battery aluminum-plastic film trimming molding, and it can also be used for cutting off other soft materials.

features

1. It uses the silver linear slide group for guidance, high precision to ensure that the upper and lower cutting between the zero gap and long service life;

2. It uses plexiglass protective cover to prevent cut hand and cut the battery;

3. Cutting knife from top to bottom use of high-speed steel, with sharp blade;

4. Built-in pressure gauge, from which you can observe and accurately control the size of the trimming pressure

5. Cylinder control cutting edge of the battery edge cutting, easy to form automation, trimming width can be adjusted;

6. Air pressure and speed can be set to adjusted;

7. A product positioning tray, adjustable from top to bottom to facilitate the positioning of the battery;

8. Using foot switch, reliable, convenient and fast;

Specifications

Model	Battery Edge Cutting Machine MR-QP200
Working Voltage	110 - 240VAC, single phase
Compress Air Pressure Requirement	0.5 - 0.7 MPa (Each stroke will consume 0.09L air )
Size Info (Trimming Width/Length)	Trimming Width: 2~8mm adjustable Max. Trimming Length: 200mm High-quality tooling steel blades.
Stroke Frequency	~10 seconds per trial
Cutter life	1 million/grinding
Speed	600 times / hour
Power	100W
How to use this Tool Suite	When the pouch cell is fabricated, an uneven edging excess is expected. In order to make a neat and tidy cell with smooth edge just like the commercial pouch batteries, please follow the steps in below: Step 1. Use the MR-QP200 trimming machine to cut off the excess area of the casing edge, only leave the size appropriate for the edge folding and ironing Step 2. Use the MR-TP200 ironing machine to smooth the edge prior to the folding Step 3. Use the MR-ZP200 folding machine to partially fold the edge Step 4. Use the MR-TP200 ironing machine to smooth the folded section again and then iron the longer section against the sides of the case. Now a neat and tidy cell is finished.
Net Weight	35kg
Product Dimensions	L320x W180x H340mm
Compliance	CE Certificate
Warranty	One Year limited warranty with lifetime support

Standard Packing List

Item	Qty
Battery edge cutter machine	1 set
Power line (according to your requirements)	1 pcs
Foot pedal	1 pcs
socket head wrench	1 set
Operating manual (English)	1 book

3-In-1 Edge Ironing Trimming and Folding Machine

Conpany SHOW

customer show

Hot Tags: pneumatic battery edge trimming machine, China pneumatic battery edge trimming machine manufacturers, suppliers, factory

PRODUCTS