Pouch Cell Battery Sealing MachineModel: MR-YF200
Pouch Cell Battery Sealing Machine is used to seal the aluminum-laminated film of pouch lithium-ion batteries, ensuring an airtight and reliable enclosure. It plays a critical role in battery performance, preventing electrolyte leakage and protecting the cell from external contaminants.
Applications:
Pouch Cell Battery Sealing Machines are used in lithium-ion battery manufacturing and research to ensure a secure, airtight enclosure for pouch cells. Their applications span from R&D labs to mass production lines, covering various stages of battery assembly.
Features
* Precise Temperature Control: Adjustable heating elements ensure uniform and consistent sealing. Typically ranges from 100°C to 250°C, depending on the pouch material.
* Adjustable Sealing Pressure & Time: Ensures a strong and uniform seal by optimizing pressure and dwell time. Prevents defects like wrinkles, weak seals, or burns.
* Vacuum Sealing Capability: Removes trapped air and prevents electrolyte leakage. Essential for high-quality pouch cell manufacturing.
* Pre-sealing: Temporary sealing before electrolyte injection.
: Precision-Engineered Sealing Dies: Flat or textured sealing bars to optimize adhesion. Customizable for different pouch cell sizes.
* High Durability & Safety Features: Stainless steel structure for long-term durability. Over-temperature & over-pressure protection for safety.
technical specifications
| Name | Pouch Cell Battery Sealing Machine MR-YF200 |
|
Chamber |
The chamber is made of aluminum alloy, which is corrosion resistant and has a firm structure; |
|
Vacuum degree |
The vacuum degree can be adjusted up to -95Kpa (the buyer shall provide the vacuum pump); |
|
Head temperature |
Room temperature～250℃, temperature adjustable; |
|
Temperature control accuracy |
±2℃; |
|
Heat sealing pressure |
0～7Kg/cm2 adjustable; |
|
Heat sealing time |
0～99 seconds adjustable; |
|
Edge sealing width |
5±0.4mm (can be customized) |
|
Maximum edge sealing length |
200mm (can be customized, such as 300/400/500mm sealing length) |
|
Seal thickness range |
60~300um |
|
Seal thickness accuracy (mm) |
Sealing thickness difference between any two points<15um |
|
Air consumption |
About 0.2L compressed gas per seal once. |
|
Working speed of air compressor |
≥180 times/h |
|
power |
Using 300w heating tube, the power consumption when heating is about 0.6KW. |
|
Power Supply |
220V/50Hz; |
|
Compressed air source |
0.5～0.8Mpa; When used in the glove box, the cylinder power source must use the same working gas used in the glove box; |
|
Working chamber |
470mm*480mm*430mm; |
|
Control box |
420mm*320mm*220mm |
|
Equipment weight |
About 50Kg |
Product Display
Pouch Cell Vacuum Sealer
Pouch Cell Vacuum Sealing Machine
1. Mechanical part: lower template mechanism, vacuum chamber mechanism, driving mechanism, guide mechanism, base mechanism, electric box control section etc.
2. Electrical parts: pneumatic components, solid state relays, solenoid valves, photoelectric switches etc.
3. main components:
Cylinder: AIRTAC
Bearing: NSK domestic high quality
Thermostat: Omron (imported from Japan)
Time relay: Omron / domestic quality
Intermediate relay: Omron (imported from Japan)
Maintenance methods and precautions
1. Wipe the upper and lower plates and vacuum chamber frequently to keep them clean.
2. Lubricate the moving parts of the bearing to keep it moving smoothly.
3. When not use for a long time, wipe the surface of the moving parts and make it clean. The surface should be spray-protected with anti-rust oil.
4. Regularly check the screws, nuts, pins and other fasteners in various parts of the machine to prevent loosening and prevent the machine Quality accidents and personal accidents.
Safe Operating Procedures
1. During operation, it is strictly forbidden to extend your hands and other parts into the vacuum cavity, the moving parts of the ball guide bush, and the work dangerous area to cause personal injury. Do not allow two or more people to operate during operation to avoid accidental injury.
Note: It has electrical protection device and safety cover, so that all moving parts are inside the cover to ensure personal safety.
2. External technical personnel and external designated personnel cannot arbitrarily disassemble and debug the equipment.
3. Do not disassemble circuit components without permission.
Hot Tags: pouch cell battery sealing machine, China pouch cell battery sealing machine manufacturers, suppliers, factory, Filtration System For NMP, Battery Electrode Coating, Laboratory Viscometer, Slitting Machine, Electrode Cutter, Digital viscometer
.png)
